Starting from the heat source reform of the rotary kiln, the types of rotary kiln vary, with electricity as the heat source, mainly according to the technical requirements of the product, some are to change the power frequency power supply into a low frequency power supply, and some to change the switching power supply into a DC power supply, for some Sending to the circuit to shorten the power-saving transformation, self-control transformation of some electrodes, etc. Some rotary kiln fuel can be changed to burn the accepted combustible gas, and some are changed from fuel and gas to electric heating. In short, they are all used to eliminate energy. The problem of consumption.

 

The thermal insulation transformation of the rotary kiln, how to make the rotary kiln changed to operate, the lower situation is also hundreds of degrees, in the state of the rotary kiln insulation is directly related to other energy sources. With the new insulation material exchanged or modified insulation state, you can directly eliminate the fuel and transform the situation.

 

Hard-plug fuel and gas, the burning system is transformed into a new burner to replace the old-fashioned burner, and some can accept the waste heat of flue gas for preheating the dyeing atmosphere, making it more energy-saving and environmentally friendly? The transformation of hard plug coal is to transform the original coal seam into a floating combustion to increase the burning rate.